Loading ...
Loading ...
Loading ...
4.1 US oz (120 cm )
15 lbf·ft (20 N·m , 2.0 kgf·m)
RIGHT REAR
drain bolt
lower edge
sealing washer
oil fill cap
187
Changing Oil
Final Drive Oil
Servicing Your Honda
Safety Precautions
Improper disposal of drained fluids is harmful to the environment.
Refer to on page .
Install the oil fill cap.
Make sure the final drive oil level is at the lower edge of the oil fill inspection
hole.
Fill the final drive with the recommended oil:
Change the oil with the final drive at normal operating temperature to assure
complete and rapid draining.
Place the motorcycle on its center stand on a firm, level surface.
Place a drain pan under the drain bolt.
Remove the oil fill cap, drain bolt and sealing washer.
After the oil has completely drained, check that the sealing washer is in good
condition. Reinstall the drain bolt with its sealing washer (or a new washer, if
necessary) and tighten it to the specified torque:
Pour the drained oil into a suitable container and dispose of it in an approved
manner (page ).
1.
2.
3.
4.
5.
6.
7.
154
223
１１／０１／１９ １２：１４：２１ ３１ＭＣＡ７００ ０１９４
Loading ...
Loading ...
Loading ...