Loading ...
Loading ...
Loading ...
Installation and connection
102
Drainage
The suds are drained through a drain
pump with a 1m delivery head. For the
water to drain freely, the hose must be
installed free of kinks. The elbow piece
supplied hooks onto the end of the
hose. If required, the hose can be
extended to a length of up to 5m. The
necessary parts can be purchased from
Miele.
For a delivery head of more than 1m
(up to a max. of 1.8m) a replacement
drain pump will need to be fitted.
Please contact Miele for advice. In this
case the hose can be extended to a
maximum of 2.5 m. The necessary
parts can be purchased from Miele.
Drain hose connection options
1. Directed into a sink or basin.
Please note:
– Hook the hose over the edge and
secure it.
– Make sure that the water can drain
away freely without hindrance.
Otherwise there is a risk of water
overflowing or of some of the
drained water being sucked back
into the machine.
2. Connected securely to a plastic drain
pipe with a rubber nipple (there is no
need to use a siphon).
3. Connected securely to a floor drain
(gully).
4. Connected securely to a standpipe.
Connecting to a washbasin
a
Adapter
b
Washbasin nut
c
Hose clip
d
End of the hose
Fit the adapter to the sink drain
outlet using the nut .
Attach the end of the hose to the
adapter .
Use a screwdriver to tighten the hose
clip up close to the nut.
Loading ...
Loading ...
Loading ...