Loading ...
Loading ...
Loading ...
11
2. Setting up the Display
2. Toggle to the up or down to select
main menu [PIP / PBP], then toggle to
the right to confirm.
3. Toggle to the up or down to select
[PIP / PBP Mode], then toggle to the
right.
4. Toggle to the up or down to select
[Off], [PIP], [PBP 2Win], [PBP 3Win] or
[PBP 4Win], then toggle to the right.
5. Now you can move backward to set
the [Off], [PIP], [PBP 2Win], [PBP 3Win]
or [PBP 4Win].
6. Toggle to the right to confirm your
selection.
MultiView in OSD menu
• PIP / PBP Mode: There are five modes
for MultiView: [Off], [PIP], [PBP 2Win],
[PBP 3Win] and [PBP 4Win].
[
PIP
]: Picture in Picture
Open up a sub-window
side-by-side of other
signal source.
B
A (main)
When the sub source is
not detected:
B
A (main)
[
PBP 2Win
]: Picture by Picture
Open up a sub-window
side-by-side of other
signal sources.
BA (main)
When the sub source is
not detected.
A (main)
[
PBP 3Win
]: Picture by Picture
Open up two sub-
windows of other
sources.
B
C
A
(main)
When the sub sources
are not detected.
A (main)
[
PBP 4Win
]: Picture by Picture
Open up three sub-
windows of other signal
sources.
B
DC
A (main)
When the sub sources
are not detected.
A (main)
Note
The black strip shows on the top and
the bottom of the screen for the correct
aspect ratio when in the PBP mode.
• PIP Size: When PIP is activated, there
are three sub-window sizes to
choose: [Small], [Middle], [Large].
B
A (main)
Small
Middle
Large
• PIP Position: When PIP is activated,
there are four sub-window
positions to choose.
Top-Right Bottom-Right
Loading ...
Loading ...
Loading ...