Loading ...
Loading ...
Loading ...
8
|
ENGLISH
STEAM CLEANING ACCESSORIES
WARNING: Do not connect accessories while unit is emitting steam.
STEAM JET NOZZLE / SQUEEGEE / TRIANGLE BRUSH
1. Select one of the three accessories (Steam Jet Nozzle, Squeegee or Triangle Brush – Steam
Jet Nozzle shown as example), and align (A) end of accessory with Main Nozzle (B). Align
hole in accessory with grey lock/release button on Nozzle.
2. Press down on grey lock/release button. While continuing to hold button down, slide
accessory onto Nozzle until button snaps through rectangular hole.
NOTE: The Steam Jet Nozzle, Squeegee and Triangle Brush can be connected to the
end of an Extension Wand for reaching high or difcult spots. Connect the Extension
Wand (or Wands) as outlined on Page 6, then connect your desired accessory to the
Wand in the same way as you would normally connect to the Main Nozzle.
UTILITY BRUSHES
NOTE: Utility Brushes connect to the Steam Jet Nozzle, not the Main Nozzle.
1. Align guide tab on inside of Utility Brush (A) with groove on bottom of Steam Jet Nozzle tip
(B).
2. Firmly press Utility Brush onto tip of Steam Jet Nozzle. Press it on as far as possible to
prevent steam leakage (See gure 3-C).
3. To remove Utility Brush, simply grip it rmly and pull it off Steam Jet Nozzle.
B
A
C
A
B
Assembling Your Multi-Use
Steam Canister
FIGURE 3
Main Nozzle
Loading ...
Loading ...
Loading ...