Loading ...
Loading ...
Loading ...
16
SET UP CONTINUOUS DRAINAGE
The dehumidifier has a continuous drain hole that can be connected to a plastic pipe with a 15
mm inner diameter (Not Supplied). Water can be plumbed in or drained into a sink, a larger
receptacle or through the wall into an outside drain. Please follow the steps below to set your unit
up for continuous drainage.
1. Cut off the cover for the continuous drain on the back of the unit.
2. Pull out the water tank and connect a water tube with an inner diameter of 15mm to the
drain connector, and ensure the connection is tight
3. Replace the water tank into position within the unit.
This unit uses gravity to dispose of the water collected and as such the drain should be lower than
the dehumidifier water outlet. Be sure to run the water pipe downward and let the water flow out
smoothly. Do not kink or bend the pipe.
NOTE: When the continuous drain feature is not being used, remove the pipe installation, to start
the water collecting in the water tank.
The permanent drain can be used in conjunction with a water pump (e.g. when draining from a
cellar) to lift the water upwards.
Loading ...
Loading ...
Loading ...