Loading ...
Loading ...
Loading ...
7
1.Use a Torx/Hex wrench (included) to open the dome enclosure by unfastening the three inner hex screws on
enclosure.
2.Place the installation sticker on the wall or ceiling surface that you wish to mount your camera.
3.Using the X’s on the installation sticker, drill 3 holes to allow for the insertion of the included expansion bolts.
4.If the camera’s cable will be exiting through the wall or ceiling surface, please be sure to drill an exit hole and pull
the cable through.
5.If the camera’s cable will be exiting through the side of the camera, route the cable through the U-shaped
channel on the side of the enclosure.
6.Align the camera with the installation sticker, then line up the 3 screw holes in the camera pedestal to the three
plastic expansion bolts on the installation surface. Put the three included screws through the camera then insert
them into the expansion bolts firmly.
7.Adjust the camera in the position that you want it to be in, then reattach the dome body to the base of the
camera.
Note: Range of lens: vertical (0°～+65°), horizontal (0°～+355°). When adjusting the camera into position, please
ensure that the camera’s enclosure does not block the image or cause reflection of IR light.
MicroSD Card Installation
A microSD card can be used to store and view local recordings/snapshots. This camera requires a class 10 or above
microSD card formatted to FAT32 to function. The camera can handle a max of 256GB of microSD card storage.
Note: You will need to access the camera’s motherboard to insert the microSD card.
1. Remove the lens cover for the camera with the supplied wrench tool to access the motherboard.
2. Locate the provided microSD card slot on the motherboard and slide the clasp back to open.
3. Place the microSD card, into the provided microSD card slot gold pins down and close the clasp.
4. Slide the clasp forward to secure the microSD card to the pins and secure the clasp.
Camera Access Setup
This section will provide information on how to setup and access your camera through the following methods:
Local PC (Web User Interface (Web UI), Amcrest Surveillance Pro, etc.)
Loading ...
Loading ...
Loading ...