Loading ...
Loading ...
Loading ...
20
HOW TO USE
CYCLE GUIDE
The cycle guide below shows the default settings, available options
and recommended fabric types for each cycle. Allowable modifier
adjustments are shown below the default setting for each cycle.
Cycle
Fabric or
Load Type
Wash Mode Temp. Spin Soil
Soak
Stain
Care
Extra
Rinse
Water
Plus
Delay
Wash
PGM
Save
Normal
Cotton, linen,
shirts, jeans,
mixed loads
Extra Hot
b
Extra High Heavy
★ ■
c
● ● ● ●
Steam
Hot
High
Turbo Wash™ Warm Medium Normal
Cold Wash
b
Cold
Fabric Softener Tap Cold No Spin Light
Heavy Duty
Heavily soiled
cotton fabrics
No Option Extra High Heavy
★ ■ ● ● ● ●
Steam Hot High
Turbo Wash™ Warm Medium Normal
Cold Low
Fabric Softener Tap Cold No Spin Light
Bedding
Large items
such as blankets,
comforters, and
sheets.
No Option Heavy
★ ● ● ●
Steam Hot
Warm Medium Normal
Cold Wash Cold Low
Fabric Softener Tap Cold No Spin Light
Use the Bedding cycle for items such as pillows, comforters, pet bedding and other articles which have
difficulty absorbing water. DO NOT WASH EXCESSIVELY LARGE ITEMS. If large/bulky items do not
fit easily into the tub, there may not be enough room for them to move during washing. Keep like items
together; do not mix large bulky items with smaller clothing items. Failure to follow these instructions
may result in damage to the clothing or to the washer.
Sanitary White fabrics
No Option Extra Hot Extra High Heavy
★ ● ● ● ●
Steam High
Turbo Wash™ Medium Normal
Low
Fabric Softener No Spin Light
Allergiene™
Heavily soiled
underwear, work
clothes, diapers,
etc. (less than
11 lbs.)
Extra Hot Extra High Heavy
● ● ● ●
Steam High
Medium Normal
Low
Fabric Softener No Spin Light
Bright
Whites™
Underwear,
pillow covers,
bed sheets, baby
wear. (less than
12 lbs.)
No Option Extra High Heavy
★ ● ● ● ●
Steam Hot High
Turbo Wash™ Warm Medium Normal
Low
Fabric Softener No Spin Light
Tub Clean
Refer to page
29.
●
Steam Hot High
Light
b
Cold Wash and Extra Hot are not available with the Heavy soil level.
c
Stain Care cannot be used if Cold Wash is selected.
NOTE: The following options can only be used independently of each other: Steam, Turbo Wash™, Cold Wash.
Soak and Stain Care cannot be selected together.
Fabric softener and Turbo Wash™ cannot be selected together.
NOTE:
To protect your garments, not every wash/rinse temperature, spin speed, soil level, or option is available with
every cycle. A chime will sound and the LED will not light if the selection is not allowed.
* When a cycle is selected, the default time for that cycle is displayed. This time will change as modifiers or
options are selected. Once the START/PAUSE button is pressed, the washer will measure the load. The esti-
mated time may change once the load has been measured. The washer automatically adjusts the wash time
for the amount of laundry, water pressure, water and other operating conditions.
●
★
■
Default Setting
Available options
Cannot be used if Steam is selected
Turbo Wash™ will be deselected
MFL39760288_E_A5.indd 20 2017. 9. 14. 오후 4:04
Loading ...
Loading ...
Loading ...