Loading ...
Loading ...
Loading ...
Black plate (351,1)
北米Model "A2470BE-B" EDITED: 2010/ 9/ 21
. If the cap cannot be removed,
contact your SUBARU dealer for
inspection.
. After releasing the electronic
parking brake by using the elec-
tronic parking brake release tool,
make sure that the cap is rein-
stalled to the parking brake re-
lease device. If the cap is not
reinstalled, water or dust enters
the device and the device may
malfunction.
NOTE
It may be difficult to release the elec-
tronic parking brake by using the
electronic parking brake release tool.
Have your SUBARU dealer release the
electronic parking brake if necessary.
In the event that you cannot release the
electronic parking brake by pulling the
electronic parking br ake switch or b y
depressing the accelerator pedal, you
can release the electronic parking brake
manually by using the electronic parking
brake release tool.
1. Shift the shift lever in the “1” or “R”
position (MT models) or the select lever in
the “P” position (AT and CVT models).
2. Turn the ignition switch to the “LOCK”
position.
3. Make sure that the brake system
warning light and the indicator light on
the parking brake switch have turned off.
4. Use t ire stops under the tires to
prevent the vehicle from moving.
5. Take out the electronic parking brake
release tool. Refer to “Maintenance tools”
F9-3.
6. Insert the electronic parking brake
release tool into the cap of the parking
brake release device.
7. Remove the cap of the parking brake
release device by turning the electronic
parking brake release tool counterclock-
In case of emergency 9-17
– CONTINUED –
9
Loading ...
Loading ...
Loading ...