Loading ...
Loading ...
Loading ...
English 5
WARNING: To prevent flare-ups all grates must be properly posi-
tioned on the cooktop whenever the cooktop is in use. Each of the four
feet must be placed into the corresponding dimples in the cooktop. Do
not use a grate if the rubber feet are missing or damaged.
Burner Control Knobs The standard burner controls have an infinite number of heat settings with no
fixed positions.
Figure 4 - Burner Control Knob
To operate: Select the appropriate control knob, push down and turn counter-
clockwise to the desired flame size. Turn OFF by turning the control knob clock-
wise to OFF.
A rubber grommet is located under each control knob.
To remove knob and grommet: With burner in the OFF position, gently lift knob
up and off. Gently pull grommet toward center and lift out.
WARNING: To avoid electric shock, do not reach through opening
into rough-in box.
To replace grommet and knob: Replace grommet by placing center groove
around cooktop. The rubber grommet should be firmly attached around the cook-
top opening. Place the control knob indicator line at the OFF position; press down
firmly.
Using the Cooktop
Before Using the Cooktop
for the First Time
• Remove all packing materials and literature from the cooktop surface.
• While cool, wipe with a clean, damp sponge and dry.
• There may be a slight odor during the first several uses; this is normal and will
disappear.
• Optimum cooking results depend on the proper cookware being selected and
used. (See Proper Cookware.)
• Read all safety precautions and Use and Care Manual information prior to
operating.
LO
HI
OFF
Loading ...
Loading ...
Loading ...