User Manual Philips S3134/51 Wet Or Dry Electric Shaver

Different countries may use different voltages in their electrical devices. Not using compatible voltage can damage of your device.
Always check if your product's adapter is suitable for certain voltages, by checking the specifications of Philips adapter provided with your product.
Our adapters have automatic voltage selection and will show 100 to 240 volts printed on the adapter. This means the adapter is suitable for mains voltages ranging from 100 to 240 volts.
Plug
Even if two countries operate on the same voltage or your adapter is suitable for the voltage used, plugs abroad can have different shapes. Check the type of plug of the country you are visiting. For example, the rectangular US plug does not fit the round shaped European receptacle. A travel adapter will allow you only to plug your appliance into another type of socket.

Yes, you can recharge your shaver after every shave. The battery in your Philips shaver is a lithium-ion battery, which allows you to recharge it every day.

Wet shaving with foam or gel uses more energy and can thus drain your shaver's battery much faster. If you use your Philips Shaver for dry shaving only, the battery can last much longer.

Both dry and wet shaving have their own advantages. It comes down to your personal shaving preference. Some points to consider are as follows:
- Dry shaving can be done almost anywhere, even on the go, and there is hardly any cleaning involved.
- Wet shaving feels refreshing and is often beneficial for sensitive skin, as it reduces friction and irritation caused by a blade.

Depending on the model you have, you can charge your Philips Shaver in different ways. Always use the original charger that came with your shaver, as not all chargers are compatible with all shavers.
Charging your Philips Shaver with a Standard Plug-in charger
1. Make sure that the shaver is switched off.
2. Insert the small plug of the charger into the bottom of the shaver and put the supply unit in the wall socket. Depending on the shaver model, the charging time may vary from 1 to 8 hours.
3. After charging, remove the supply unit from the wall socket and pull the small plug out of the appliance.