Loading ...
Loading ...
Loading ...
Basic Operation & Riding
73
Starting & Stopping the Engine
If the engine fails to start after repeated attempts, it may be flooded
with excess fuel. To clear a flooded engine:
1.
Leave the engine stop switch set to RUN (e).
2.
Push the choke knob down all the way to fully OFF.
3.
Open the throttle fully.
4.
Press the start button for 5 seconds (or operate the recoil starter
several times).
5.
If the engine starts, quickly close the throttle, then, if idling is
unstable, open it slightly.
If the engine does not start, wait 10 seconds, then follow the
High Air Temperature procedure (page 72).
If the engine still won’t start, refer to If Your Engine Quits or Won’t
Start, page
200.
You can restart the engine while the vehicle is stopped by squeezing
the front brake lever and pressing the start button.
Do not press the throttle lever while starting in gear. Your ATV is
equipped with a start inhibitor system that will cut off the ignition if
the throttle is open while attempting to start in gear.
Once you have started the engine, release the front brake lever, then
apply throttle gradually.
Flooded Engine
Stalled Engine
Loading ...
Loading ...
Loading ...