Loading ...
Loading ...
Loading ...
Servicing Your Honda
127
Engine Oil & Filter
(cont’d)
4.
Remove the oil filter bolt (7) and oil filter cover (8).
Let the remaining oil drain out.
5.
Remove the oil filter (9) from the cover.
6.
Remove the spring (10) and washer (11). Do not discard the
washer with the old oil filter.
7.
Discard the oil filter in an approved manner (page 196).
8.
Coat new O-rings (12) with engine oil and install them into the
grooves in the oil filter cover and oil filter bolt. Install a new oil
filter.
Use only the Honda Genuine oil filter or a filter of equivalent
quality specified for your model. Using the wrong Honda filter or
a non-Honda filter which is not of equivalent quality may cause
engine damage.
9.
Install the washer, spring, oil filter cover and oil filter bolt. Tighten
the oil filter bolt to the specified torque.
Oil filter bolt torque:
13 lbf·ft (18 N·m , 1.8 kgf·m)
NOTICE
Improper installation of the oil filter can cause serious engine
damage.
(12)
(10)
(9)
(8)
(11)
(7) oil filter bolt
(8) oil filter cover
(10) spring
(11) washer
(7)
(9) oil filter
UNDER ENGINE
(12) O-rings
Loading ...
Loading ...
Loading ...