Loading ...
Loading ...
Loading ...
(379,1)
北米Model "A3230BE-A" EDITED: 2021/ 5/ 19
leading to an unexpected accident.
! After the vehicle is stopped by the
system
S07BN0304
After the brake pedal is depressed, the
RAB OFF indicator will illuminate and the
system will temporarily stop operating.
The RAB OFF indicator will turn off when
the select lever is shifted to a position other
than the “R” position.
The system will operate again the next
time the select lever is shifted to “R”
position.
In circumstances such as the following, the
Reverse Automatic Braking (RAB) system
automatically stops operating and the RAB
OFF indicator illuminates.
– There is ice, snow, mud, or other
substance on the sonar sensors.
– The select lever was shifted to “R”
when there is an obstacle located close to
the rear bumper.
– A sound with a frequency close to that
of the sonar used by the Reverse Auto-
matic Braking (RAB) system was de-
tected.
NOTE
. In the following cases, after the
vehicle has been stopped by the Re-
verse Automatic Braking (RAB) sys-
tem, brake control is released and the
electronic parking brake operates. For
details about releasing the parking
brake, refer to “Electronic parking
brake” FP352.
– When 2 minutes pass after the
vehicle is stopped.
– When any door is opened.
– When the EyeSight system mal-
functions.
. The message/warning message will
not display for approximately 8 sec-
onds after turning the ignition switch to
the “ON” position.
& Canceling the Reverse Auto-
matic Braking (RAB) system
operation
S07BN04
The Reverse Automatic Braking (RAB)
system can be temporarily canceled by
any of the following operations.
. Depressing the brake pedal*
. Depressing the accelerator pedal*
. The accelerator pedal is kept de-
pressed (In this case, limited acceleration
will be canceled and the vehicle will
continue reversing.)
. The select lever is shifted to a position
other than the “R” position.
*: While the vehicle is stopped by the automatic
braking
NOTE
The system will be canceled if the
object is no longer detected.
& Reverse Automatic Braking
(RAB) system ON/OFF setting
S07BN05
While the select lever is shifted to the “R”
position, the below functions of the Re-
verse Automatic Braking (RAB) system
can be set by operating the audio/naviga-
tion monitor.
– CONTINUED –
Reverse Automatic Braking (RAB) system
377
7
Starting and operating
Loading ...
Loading ...
Loading ...