Loading ...
Loading ...
Loading ...
(229,1)
北米Model "A3230BE-A" EDITED: 2021/ 5/ 19
not turn on when it becomes dark outside,
turn the light switch to the “
” position.
. Auto-on/off wiper-linked headlights
While the light control switch is in the
“AUTO” position, the headlights will auto-
matically turn on when the windshield
wipers operate several times. The head-
lights will automatically turn off when the
wipers stop.
NOTE
The ON/OFF setting of this function can
be changed by a SUBARU dealer.
Consult your SUBARU dealer for de-
tails.
“
” position (except for Canada mod-
els):
The headlights are all off.
“OFF” position (for Canada models):
The headlights are all off *
1
*
2
.
*1: When the light switch is switched to the
“OFF” position while the vehicle is stopped,
the lights turn off. Then the light switch will
automatically return to the “AUTO” position.
*2: The headlights will automatically change to
the AUTO mode when the following condi-
tions are met:
. The engine is running.
. The parking brake is fully released.
. The select lever is in a position other than the
“P” position.
! Welcome lighting function
S03AH0103
The welcome lighting function turns on the
low beam headlight for smooth approach-
ing to or exiting from the vehicle at night or
in a dark place.
The function is activated while all of the
following conditions are met.
. The light control switch is in the “AUTO”
position.
. It is dark enough to turn on the auto on/
off headlights.
NOTE
If the engine is turned off after turning
off the light switch, the welcome light-
ing function may not operate (for
Canada models).
When approaching:
While the welcome lighting function is
activated, the low beam headlights will
automatically illuminate when unlocking all
doors including the rear gate by using the
remote keyless entry system.
The low beam headlights will remain
illuminated for 30 seconds
*1
and then turn
off. However, if any of the following
operations is done, the low beam head-
lights will turn off.
. The doors are locked.
. The light control switch is turned to a
position other than “AUTO”.
. The ignition switch is turned to the “ON”
position.
When exiting:
While the welcome lighting function is
activated, the low beam headlights will
remain illuminated even when either of the
following operation is done.
. The push-button ignition switch is
turned to the “OFF” status (models with
“keyless access with push-button start
system”).
. The key is pulled out from the ignition
switch (models without “keyless access
with push-button start system”).
The low beam headlights will turn off under
any of the following conditions.
. 3 minutes have passed since the low
beam headlights were illuminated by the
welcome lighting function.
. 30 seconds have passed since the door
is opened and closed.
*1
. The light control switch is turned to a
position other than “AUTO”.
. The locking procedure is performed
twice. When performing the unlocking
procedure after performing the locking
– CONTINUED –
Light control switch
227
3
Instruments and controls
Loading ...
Loading ...
Loading ...