Loading ...
Loading ...
Loading ...
(310,1)
北米Model "A3230BE-A" EDITED: 2021/ 5/ 19
with your eyes and the mirrors.
. Always operate the vehicle as
you would without the Front View
Monitor.
. Do not use the Front View Monitor
in the following situations.
– You are driving on a dirt road
or a road covered in snow.
– The camera malfunctions (e.g.
the lens or bracket is broken).
. If the outside temperature is low,
the monitor screen may become
dark or the image may become
dim. In particular, the image of a
moving object may be distorted
or disappear from the screen.
You must always check the traffic
around the vehicle directly with
your eyes when driving it.
& How to access the Front View
Monitor
S06BA01
1) “VIEW/ ” button
To change over to the camera screen,
perform either of the following operations
when the ignition switch is in the “ACC” or
“ON” position.
. Press the “VIEW/
” button.
. Shift the select lever from “R” to “D” only
when the Camera Shift Link is set to “On”.
For details, refer to “Camera shift link
setting” FP220.
& How to cancel the Front View
Monitor
S06BA02
! Manual cancellation
S06BA0201
Press the “VIEW/ ” button again.
! Automatic cancellation
S06BA0202
If any of the following conditions are met,
the Front View Monitor is canceled auto-
matically.
After accessing the Front View Monitor
by pressing the “VIEW/
” button:
. Approximately 3 minutes have passed
since the last operation.
. The vehicle speed becomes 12.5 mph
(20 km/h) or higher.
. The select lever is shifted to the “P”
position.
. The parking brake is applied.
After accessing the Front View Monitor
using the select lever:
. Shift the select lever into the “P”
position.
. The vehicle speed becomes 5 mph (8
km/h) or higher.
. Approximately 9 seconds have passed
since the last operation.
. The parking brake is applied.
Front View Monitor
308
Loading ...
Loading ...
Loading ...