Loading ...
Loading ...
Loading ...
8 EN
3 Prepare
Always follow the instructions in
this chapter in sequence.
Connect power
Caution
• Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the
bottom of the unit.
• Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
• Before connecting the AC power cord, ensure you have
completed all other connections.
• Connect the AC power cord to
• the AC IN socket on the back of the
unit.
• the wall power socket.
Turn DS9100W on
After proper power connection, the
unit switches on automatically.
• Wait for successful boot-up of the unit.
» The boot-up takes about 25 seconds.
» During boot-up, the indicator on front
panel blinks yellow.
» Afterboot-up,forrst-timesetup,the
indicator turns solid yellow, and the
unit is ready for Wi-Fi setup. If a Wi-Fi
connection has been set up previously,
the indicator blinks amber and
white slowly to search for the set up
Wi-Fi network.
• To switch the unit to standby mode, press
on the front panel.
• To switch the unit on from standby mode,
press again.
Prepare the remote control
Caution
• Risk of explosion! Keep batteries away from heat,
sunshineorre.Neverdiscardbatteriesinre.
Forrst-timeuse:
• Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1 Press the hole with the tip of a ball-point
pen or a sharp tool to open the battery
compartment.
2 Insert one CR2025 battery with correct
polarity (+/-) as indicated.
Loading ...
Loading ...
Loading ...