Loading ...
Loading ...
Loading ...
22
ADAPTING MICROWAVE BLOWER
FOR RECIRCULATION (cont.)
C4.
Installation Instructions
NOTE: When mounting
the microwave oven,
thread power cord
through hole in bottom of
top cabinet. Keep it tight
throughout Steps 1–3. Do
not pinch cord or lift oven
E\SXOOLQJFRUG
/LIWPLFURZDYHWLOWLW
forward, and hook
slots at back bottom
edge onto four lower
tabs of mounting
plate.
2
5RWDWHIURQWRIRYHQ
up against cabinet
bottom.
1
Close the blower door. Slide blower shield onto
the top of the blower door opening.
5HPRYHWKHPHWDOYHQWIDQFRYHURQWKHEDFNRI
WKHPLFURZDYHE\VOLGLQJLWXS
7
6
MOUNT THE MICROWAVE
OVEN
C5.
FOR EASIER INSTALLATION
AND PERSONAL SAFETY, WE
RECOMMEND THAT TWO PEOPLE INSTALL THIS
MICROWAVE OVEN.
IMPORTANT: Do not grip or use handle
during installation.
NOTE:,I\RXUFDELQHWLVPHWDOXVHWKHQ\ORQ
grommet around the power cord hole to prevent
cutting of the cord.
NOTE: We recommend using filler blocks if the
cabinet front hangs below the cabinet bottom shelf.
IMPORTANT: If filler blocks are not
used, case damage may occur from
overtightening screws.
Back of
Microwave
Oven
Blower
5HWDLQLQJ
Screws
%ORZHU5HWDLQLQJ
Screw
Secure the blower to the microwave using the
blower retaining screws from Step 1.
8
CAUTION
Loading ...
Loading ...
Loading ...