Loading ...
Loading ...
Loading ...
50
ENGLISH
12
After rinsing the brew group, insert it again in its seat until it locks into
place (see the “Weekly Cleaning of the Brew Group” chapter). Insert
the co ee residues drawer and the co ee grounds drawer. Close the
service door.
13
Press the “ ” button to select the pre-ground co ee function. Do not
add co ee to the pre-ground co ee compartment.
14
Press the “ ” button to start a co ee brewing cycle.
15
Repeat steps 13-14 twice. Empty the container.
16
To clean the drip tray, place “Co ee Oil Remover” tablet inside and ll
it 2/3rds full with hot water. Let the cleaning solution take e ect for
about 30 minutes, then rinse thoroughly.
Green
10
Remove the co ee grounds drawer and open the service door. Remove
the co ee residues drawer and then the brew group.
11
Wash the brew group thoroughly with fresh water.
8
Let the solution take e ect for approximately 15 minutes. Make sure
you discard the dispensed water.
9
Switch the power button on the back of the machine to “I”. To turn on
the machine press the “
” button.
Wait until the automatic rinse cycle has been completed.
Loading ...
Loading ...
Loading ...