Loading ...
Loading ...
Loading ...
22
4 Permanent settings in programming mode
4 Permanent settings in programming mode
Press the ‘P’ button to enter programming mode. You can navigate
through the programme items and permanently save the required
settings using the multi-function buttons. The following settings
can be made:
Programme
item
Sub-item Explanation
‘1/4’ ‘Clean’,
‘Descale’,
‘Clean the milk system’,
‘Filter’ (only if filter is
activated)
T Start the required maintenance programme here.
‘2/4’ ‘Rinse the coffee system’,
‘Rinse the milk system’,
‘Information’
T Here you can start the desired maintenance
programme or find out what maintenance actions are
required.
‘3/4’ ‘Expert mode’
T Select your settings for speciality coffees and hot
water.
‘4/4’ ‘Choose language’
T Select your language.
‘Switch off after’
T Set the time after which the JURA should switch off
automatically.
‘Units’
T Select the unit for the amount of water.
‘Water hardness’
T Adjust the water hardness.
In the programme item
‘Expert mode’ you can make individual set-
tings for all speciality coffees and hot water. The following perma-
nent settings can be made:
Product Coffee strength Amount Temperature
Espresso 8 levels Water: 15ml–80ml normal, high
Coffee 8 levels Water: 25ml–240ml normal, high
2 espressi,
2 coffees
– Water: the amount set for the
single product is doubled.
as for single product
Cappuccino 8 levels Water: 25ml–240ml
Milk foam: 3sec.–120sec.
normal, high
Milk foam – Milk foam: 3sec.–120sec. –
Hot water – Water: 25ml–450ml low, normal, high
Adjusting the product
settings
Loading ...
Loading ...
Loading ...