Loading ...
Loading ...
Loading ...
12
1 Preparing and using for the first time
E Now decide whether you want to operate your JURA with or
without a CLARIS Smart filter cartridge.
Operation with filter cartridge: go straight to the next section (see
Chapter 1 ‘Preparing and using for the first time – First-time use with
filter cartridge activation’).
Operation without filter cartridge (see Chapter 1 ‘Preparing and
using for the first time – First-time use without filter cartridge acti-
vation’).
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
T Remove the water tank and rinse it with cold water.
T Fit the filter cartridge extension supplied on top of a CLARIS
Smart filter cartridge.
T Insert the filter cartridge with its extension into the water
tank.
T Turn the filter cartridge clockwise until it audibly clicks into
place.
T Fill the water tank with fresh, cold water and reinsert the
tank.
E The machine automatically detects that you have just inserted
the filter cartridge.
‘Use filter’ / ‘Saved’
‘Switch open’
T Place a receptacle (at least 300 ml) under the fine foam
frother.
T Turn the switch to thex position.
‘Filter is being rinsed’, water flows out of the fine foam
frother.
Rinsing of the filter stops automatically after approximately
300ml.
‘Switch close’ appears on the display.
First-time use with filter
cartridge activation
CAUTION
Loading ...
Loading ...
Loading ...