Loading ...
Continued on Next Page
SB-GM-TAHOSCNSL/10W3v2_INSTR_SKU#011220
SB-GM-TAHOSCNSL/10W3v2_INSTR_SKU#011220
STEP 7
*Read Step 7 & Step 8 before attempting the removal of
the rear face plate.*
Carefully pry up and back on the two black tabs on either
side of the console’s door hinge.
Extra care should be used in a effort to prevent
breaking these tabs.
STEP 6
Pull the wiring harness off the tab.
STEP 5
With the cup holders removed, look through the
opening and disconnect the exposed wiring harness plug.
STEP 4
Remove the cup holders from center console by pulling
upwards.
Page 2 • JL Audio, Inc 2006
STEP 9
Remove all plugs from the rear face plate.
STEP 11
Remove the wiring harness that is secured to the driver’s
side of the center console.
STEP 10
From the back side of the center console, fold down the
cup holders.
Remove two screws behind the cup holders as well as the
three screws securing the cup holder to the center console.
Remove the back panel from the center console.
STEP 8
Pry the rear face to the rear of the vehicle.
Loading ...
Loading ...
Loading ...