BrickHouseSecurity.com
Livewire 4
Wiring Guide
Notes on TXD and RXD (Advanced Installation)
TXD signal is an output on a DTE device and an input on a DCE
device. Similarly, RXD is an output on a DCE device and input on
a DTE device.
Wiring KeyPin Layout From Device
Basic Installation
Just three wires are needed for this installation.
1 2 3 4 5 6 7
Pin Wire Color Discription
7 Black Ground
6 Green Output 2
5 Yellow Output 1/Input
4 White Ignition Detection
3 Red 12v Power Input
2 Gray TXD
1 Orange RXD
Pin Wire Color Connection
7 Black Run to Ground
4 White Run to Iginition
3 Red Run to 12v Power
Pin Wire Color Connection
7 Black Run to Ground
6 Green Output 2
5 Yellow Output 1/Input
4 White Run to Ignition (Connect to Run Part)
3 Red Run to 12v Power
2 Gray TXD
1 Orange RXD
Livewire 4
Livewire 4
Advanced Installation
STOP - Advanced installation not required for regular
GPS tracking. Please contact us before attempting any
custom installations.
