Loading ...
Loading ...
Loading ...
25
USE AND CARE INFORMATION
Rangehood Control Panel
The control panel is located in the center of the hood bottom.
Warning: Do NOT force the control dial to turn beyond its limit.
Function Operation LED Color / Light Pattern
Lights - Dimmer Pressthebuttononcetoturnthelightsondimmer(B2)
Lights - High Pressthebuttonasecondtimetoturnthelightsonhigh(B2)
Lights - Off Pressthebuttonathirdtimetoturnthelightsoff(B2)
Speed 1 Quickturnoftheknobtotheright(1sttime)(B1) Green - Solid
Speed 2 Quickturnoftheknobtotheright(2ndtime)(B1) Yellow - Solid
Speed 3 Quickturnoftheknobtotheright(3rdtime)(B1) Red - Solid
IntensiveSpeed(motor
turns off after 10
minutesofoperation)
Quickturnoftheknobtotheright(4thtime)(B1) Red - Blinking
Turn the motor off
While at any speed, hold the knob for 2 seconds to the left to
turn the motor off. Alternatively, a quick turn of the knob to the
leftbackwardsthruthespeeds(1turntotheleftpastspeed
1),turnsthemotoroff.(B0)
No Color
Delay auto shut off
Hold the knob to the right for 2 seconds. The hood and lights
stayonfor10minutes,thenturnoff.(B1)
The selected speed blinks
Heat Sensor Active Pressbuttonfor2seconds(B2) Red Blinking One time
Heat Sensor Inactive Pressbuttonfor2seconds(B2) Red Blinking Three times
Heat Sensor Fault Purple blinking
Heat Sensor Features
If the motor is off and the temperature gets to approximately
130degreesF(55degreesC°)–theblowerturnsonspeed
2 for a minimum of 15 minutes. Once the temperature has
droppedbelow130degreesF(55degreesC°),themotor
turns off. If you operate the hood manually during this
function, the auto on sensor is disabled for 15 minutes.
Red - Blinking
Heat Sensor Faults
If the temperature remains too high, the blower remains on
for up to 90 minutes until the temperature has dropped below
130degreesF(55degreesC°).
Red - Blinking
B0 B1
B2
Loading ...
Loading ...
Loading ...