Loading ...
Loading ...
Loading ...
18
Ø 5/16”
x4
x4
x4
Hook the hood body onto the wall plugs 12a. Use a level to insure that Fixing Bracket is level
by adjusting the screws as shown in the picture.
Mark the wall where indicated.
Drill directly into ø 5/16" holes at all the center points marked.
Insert the purchased wall plugs in the holes.
Using thhe remaining screws to anchor the hood in holes.
If installation uses the telescopic chimney extension, refer to the installation manual included in
the Chimney Kit (CHIM3448 - CHIM2224 - CHIM2248 - CHIM3424)
11b
3
4
5
Loading ...
Loading ...
Loading ...