Loading ...
Loading ...
Loading ...
EN 59
English
Set secured connection with WPA
encryption
If you have WPA security on your router,
enter the pass phrase with the remote
control.
1. To enter the encryption key (the security
key) manually, select [Standard], then press
OK.
2. To access the onscreen keyboard, select
the text entry field, then press OK.
Set secured connection with WEP
encryption
If you have WEP security encryption, the TV
asks for the WEP encryption key in
hexadecimal numbers.
1. Locate the hexadecimal key in the router
software on your PC and make a note of the
first key in the WEP keys list.
2. Enter it on TV with the remote control.
If the security key is accepted, the TV is
connected with the wireless router.
3. If prompted, agree to the End User
Licence Agreement.
WiFi integrated
This section is for PFL42x8 TVs only.
You can connect your TV to your home
network wirelessly.
Note:
The wireless network operates in the same
2.4 GHz frequency spectrum as common
household devices, such as Dect phones,
microwave ovens or Bluetooth devices,
which can cause WiFi interference. Move
these devices away from the TV.
For optimum WiFi performance, place
the TV at a distance of less than 10 m
from the wireless router. Avoid
obstructions such as concrete walls
between the router and the TV.
Reception quality depends on the
location of the wireless router and your
local Internet service provider.
To reduce network traffic, switch off
unused network equipment in the
home network.
When playing video over your wireless
home network, we recommend that
you use an IEEE 802.11 N router. The
connection speed may differ according
to the operating environment of your
wireless home network.
Start wireless setup
1. Switch on your wireless network router.
2. Press on the TV remote control.
3. Select [Setup] > [Connect to network],
then press OK.
4. Follow the onscreen instructions.
WPS - Wi-Fi Protected Setup
1. If your router supports Wi-Fi Protected
Setup (WPS), press the WPS button on the
router.
2. After 2 minutes, select [WPS] on the TV,
then press OK.
The TV connects to your network. This
takes about 2 minutes.
Most new wireless routers have the WPS
system and carry the WPS logo. The WPS
system uses WPS security encryption and
cannot be combined with devices on your
network that use the WEP (Wired
Equivalent Privacy) security encryption.
If you still need the WEP devices in your
network, install with [Scan] > [Custom].
Scan for routers
If you have several routers in your network,
you can select the network you need.
1. To select a specific network router, press
[Scan] on the first page of the installation.
The routers with WPS and the strongest
signal are shown first in the list on screen.
2. Select the router you need, then press
OK.
If you are connecting to a WPS router,
select [WPS] on the TV.
If you want to set the PIN code in your
router software to connect, select
[WPS pin] and note down the code.
To enter the encryption key manually,
select [Standard] and enter the key
when prompted.
Loading ...
Loading ...
Loading ...