Loading ...
Loading ...
Loading ...
E12
LENSES
1 When IASE S or IASE-C S type lens is used, set the focus op-
eration change-over knob to MANU. position.
When using the IASE S or IASE-C S type lens, the camera
can be damaged if excessive force is used to try to turn the
focus ring when the knob is left in the SERVO position.
2 Turn the focus ring to bring the near or far object into focus.
5-2. FOCUS OPERATION
5-2-1. Manual Focus Operation
ZOOM
FOCUS
REMOTE 1 REMOTE2/
VIRTUAL
REMOTE 3
MANU. SERVO MANU. SERVO
Focus Operation Change-over Knob
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ft
m
ڦ
ڦ
ڦ
ڦ
ڦ
Far
Near
Focus Ring
5-3. EXTENDER OPERATION
Extender Lever
Slide the iris operation mode change-over switch to the “A” position.
The iris operation is performed automatically by the instruction from the
camera, to keep the video signal level constant.
IRIS
I.G.
A M
T
W
Iris Operation Mode
Change-over Switch
5-4. IRIS OPERATION
The iris operation mode can be switched between auto and manual with the iris operation mode
change-over switch.
5-4-1. Automatic Iris Operation
5-2-2. Servo Focus Operation
The lens with built-in extender has the built-in 2x extender.
Use the extender lever to switch between 1x and 2x.
When the extender is used, note that the light quantity may decrease
by the zoom ratio depending on the iris correction setting.
1 When IASE S or IASE-C S type lens is used, set the focus
operation change-over knob to SERVO position.
2 Mount the accessory such as focus demand. For the details, refer
to the operation manual of accessories.
5 OPERATION
ZOOM
FOCUS
REMOTE 1 REMOTE2/
VIRTUAL
REMOTE 3
MANU. SERVO MANU. SERVO
Focus Operation Change-over Knob
Loading ...
Loading ...
Loading ...