Loading ...
Loading ...
Loading ...
E7
LENSES
1 Set the zoom operation change-over knob at the bottom of
the lens drive unit to MANU. position.
2 Turn the zoom ring (or zoom lever) to perform zoom operation.
NOTE
The zoom operation change-over knob must be set to the
“MANU.” position before performing manual zoom operations.
The lens may be damaged if manual zoom operations are
forcibly performed with the knob at the “SERVO” position.
5-1-2. Servo Zoom Operation
Zoom operation can be performed by driving the built-in motor in the lens.
5 OPERATION
5-1. ZOOM OPERATION
5-1-1. Manual Zoom Operation
ZOOMFOCUS
REMOTE 1 R EMOTE2 /
VIRTUAL
REMOTE 3
MANU. SERVO MANU. SERVO
Zoom Operation Change-over Knob
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ڦ
ft
m
ڦ
ڦ
ڦ
ڦ
ڦ
1x
2x
Toward Tele end
Toward Wide end
Zoom Lever
Zoom Ring
1 Set the zoom operation change-over knob to SERVO position.
2 Press the zoom rocker seesaw to perform zoom operation.
Zoom speed changes by the depth of the switch being pressed.
The deeper the switch is pressed the faster the zoom speed.
AM
RET
IRIS
T
W
ࣜࢫືస࣮ࣔࢻ
MEMO
AUX
Zoom Rocker Seesaw
5-1-3. Maximum Zoom Speed Adjustment
The maximum speed of zoom when the zoom rocker seesaw is pressed can be adjusted with the
adjusting volume.
This adjustment can be performed on the information display. Refer to the Information Display Manual.
Max. Zoom Speed
Adjusting Volume
5 OPERATION
Loading ...
Loading ...
Loading ...