Loading ...
Loading ...
Loading ...
25
) Hang the furniture door onto the appliance door, making sure that
e brackets on th locate over the adjusting bolts.
t the gap on the lower section of the
djusting bolts. The gap should be set to approximately 9 mm (as
bracket to the bottom of the furniture door and the
nderneath of the appliance door (as shown in the drawing on the
screws on the top and the bottom of the
appliance door. You should make these adjustments so that the
e cover plate to the top
f the appliance; this will just clip
to place.
c
th e mounting bracket
c) Use a screwdriver to adjus
a
shown in the above drawing).
d) Fix the lower
u
previous page).
o It is possible to make minor adjustments to the position of the
furniture door using the
furniture door is level.
e) Insert th
o
in
Loading ...
Loading ...
Loading ...