Loading ...
Loading ...
Loading ...
22
Use a spanner to adjust the height of the adjustable feet.
m, then the adjustable
feet should be set at a height of 30 mm.
m, then the adjustable
feet should be set at a height of 50 mm.
door and door seal may be affected.
out should measure 140 mm in width and 90 mm in
height.
and then refit the grid in its original
position to hold it in place.
tion cut MUST be
made in the furniture plinth/kickboard.
o
o If your aperture has a height of 820 m
o If your aperture has a height of 870 m
o The appliance should be flush with the underside of the worktop
and be level. IMPORTANT: If the appliance is not level, then the
o A cut out must be made in the plinth/kickboard for ventilation.
The cut
o Insert the plinth/kickboard
o IMPORTANT: Please note that as shown in the above
drawing, an appropriately sized ventila
Loading ...
Loading ...
Loading ...