Loading ...
Loading ...
Loading ...
25MAINTENANCE
ENGLISH
3 Press the dust bin cover release button b to
open the dust bin cover. Shake the dust bin to
empty it.
• Be careful as dust or foreign objects may
spill out when opening the dust bin. Empty
the dust bin into a wastebasket or where
dust and foreign objects can be easily
removed.
• The dust bin can be wrapped in a plastic bag
to contain the dust when emptying the dust
bin.
WARNING
• If the Kompressor lever does not slide down
smoothly, foreign objects may be trapped
between the dust bin and the cyclonic mesh
filter. Clean the dust bin and cyclonic mesh filter
to avoid product damage.
• Do not force the Kompressor lever down if
foreign objects are caught around the working
plate of the Kompressor system. Doing so may
cause product damage.
4 Insert the crevice tool d into the cyclonic
mesh filter c and turn it counterclockwise to
remove the filter.
5 Wash the cyclonic mesh filter under running
water.
• To avoid odor and the malfunction of the
motor, allow the cyclonic mesh filter to dry
completely in a well-ventilated area out of
direct sunlight for at least 24 hours before
reassembling.
6 Use the combination tool e to clean out dust
or foreign objects inside the dust bin.
• Do not wash the product body or motor
with water.
7 Turn the product body over and lift the
Kompressor lever
f up to clean the inside of
the working plate with the provided cleaning
brush.
• Do not push the Kompressor lever down
hard. The working plate may be damaged.
8 Turn the product body over again and shake it
while pressing down the lever to remove the
dust.
9 Wrap the provided cleaning brush with a wet
paper towel, tucked into the slots g on the
handle.
us_main.book.book Page 25 Wednesday, May 13, 2020 4:20 PM
Loading ...
Loading ...
Loading ...