Loading ...
Loading ...
Loading ...
8
Assembly
12. UPHOLSTERED BACKREST INSTALLATION
12.1 NOTE: In this step, do not tighten the
Screws until all have been loosely threaded.
Assemble the Backrest (C10) to the
Backrest Tube (A04) by loosely installing
Four 5/16” Washers (B53) and Four
5/16” Screws (B50)
As shown in Fig.1.
Tighten Screws
13. SADDLE FRAME INSTALLATION
13.1 Refer to Fig. 1 Connect the Hand Pulse Cable (D09)
and Cables (D08) to all cables that come from the
Saddle Frame (A07).
13.2 NOTE: Be careful to not pinch the wires and in
this step, do not tighten the screws
until all have been loosely threaded.
Refer to Fig. 2. Assemble the Saddle Frame (A07) to
The Moveable Seat Bracket (A03) by aligning the
Four screw holes to the holes in the Moveable Seat
Bracket [A03]. Use Four M8 Bolts (B52)
and Four Washers (B53). Tighten Screws.
13.3 Assemble the Backrest Tube (A04) to the Saddle
Frame (A07) and align the holes and secure using
One M8 Bolts (B61) One M8 Washers (B57) and
One M8 Nylon Nuts (B08). Tighten the Bolt.
B50
B53
A04
C10
D09
D08
Fig. 1
Fig. 2
A03
A07
B52
B53
Fig. 3
Fig. 3
A07
A04
B61
B08
B57
Fig. 4
Loading ...
Loading ...
Loading ...