Loading ...
Loading ...
Loading ...
Your safety and the safety of others are very important.
We have provided many
important
safety
messages
in
this
manual and on your appliance.
Always
read
and
obey all safety messages.
This is the Safety Alert Symbol. The symbol alerts you to potential hazards that
can kill or injure you and others. All safety messages will follow the Safety
Alert Symbol and either the word DANGER or WARNING.
DANGER
DANGER means that failure to heed this safety
statement may result in severe personal injury or
death.
WARNING
WARNING means that failure to heed
this
safety
statement may result in extensive product
damage, serious personal injury, or death.
All safety messages will alert you about the potential hazard, tell you how to reduce the chance of injury,
and let you know what can happen if the instructions are not followed.
Before the appliance is used, it must be properly positioned and installed as
described in this manual, so read the manual carefully. To reduce the risk of fire,
electrical shock or injury when using the appliance, follow basic precautions,
including the following:
DANGER
Plug into a grounded 3 prong outlet, do not remove grounding prong, do not use an adapter, and do
not use an extension cord.
Replace all panels before operating
It is recommended that a separate circuit serving only your appliance be provided. Use receptacles
that
cannot be turned off by a switch or pull chain
Never clean appliance parts with flammable fluids. These fumes can create a fire hazard o explosion.
And
do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any
other appliance.
The
fumes can create a
fire
hazard or explosion.
Do not connect or disconnect the electric plug when your hands are wet.
Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in
electrical shock or death.
Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in
this manual. All other servicing should be referred to a qualified technician.
3
You can solve many common problems easily, saving you the cost of a possible service call. Try the
suggestions below to see if you can solve the problem before calling the servicer.
Troubleshooting
PROBLEM POSSIBLE CAUSE REMEDY
Appliance is not connected to a power Connect the appliance.
Appliance
supply.
does not
The appliance is turned off.
Switch
on
the appliance
operate.
Tripped circuit breaker or a blown fuse. Switch on circuit breaker or replace
fuse.
The temperature is not set correctly. Check the set temperature.
The ambient temperature could require Set a lower temperature
a lower temperature setting.
The door was opened too often. Do not open the door more often than
Appliance is
necessary.
not cold
The door was not closed completely. Close door properly.
enough.
Door is not hermetically sealed. Check the door seal and clean or
replace.
The condenser is too dirty. Clean the condenser when necessary.
The ventilation opening is blocked or too Clear the obstructions and clean the
dusty.
dust.
The room temperature is higher than Put the appliance in a cooler place.
average
A
large amount of food has been
added
Leave the appliance to work for a
Appliance
to the unit. while until the
set
temperature has
turns itself on been reached.
and off
The door is open too often. Do not open the door more often than
frequently.
necessary.
The door is not closed completely. Close door properly.
The door gasket does not seal properly. Check the door seal and clean or
replace.
Appliance is not connected to a power Connect the appliance.
The
light does
supply.
not work.
Tripped circuit breaker or a blown fuse. Switch on circuit breaker or replace
The light was switched off on the control
fuse
panel. Switch on the liaht.
Vibrations
The appliance is not properly leveled.
Level the appliance with the
adiustable feet.
The rattling noise
may
come from
the
flow
of the
refrigerant, which is normal. As each
The appliance
cycle ends, you may hear gurgling sounds caused
by
the flow of refrigerant in
your
appliance
seems to
If temperature fluctuations occur, the contraction and expansion of the inner walls may
make too
cause poppinq and crackinq noises.
much noise.
Level the appliance with the
The appliance is not properly level.
adjustable feet.
The appliance is not properly level. Level the appliance with the
The door will
adjustable feet.
not close
The door was reversed and not properly Check the door hinge and reassemble
properly.
installed. correctly.
The gasket is dirty. Clean the door gasket.
The shelves are out of position. Check the shelves and refit correctly,
12
Appliance Safety Troubleshooting Guide
Important Safeguards
Loading ...
Loading ...
Loading ...