Moffat MBE11DSLSS Refrigerator

Owner’s Manual and Installation Instructions - Page 7

For MBE11DSLSS.

PDF File Manual, 34 pages, Read Online | Download pdf file

MBE11DSLSS photo
Loading ...
Loading ...
Loading ...
Installation Instructions
PREPARATION
7
1. Remove all packaging material before using your
new refrigerator. This includes the foam base and all
adhesive tape holding the refrigerator accessories
inside and outside.
2. Clean both the inside and outside of the refrigerator
with a wet cloth.
3. The power cord of this appliance is equipped with
a 3-prong (grounding) plug which mates with a
standard 3-prong (grounding) wall outlet to minimize
the possibility of electric shock hazard from this
appliance.
For your safety, please review pages 2-3 for more
safety information.
4. Inside the refrigerator you will find a decorative
accessory to be installed as shown below. The
installation of this is purely a personal preference
and will not effect the performance or conditions in
any way.
1
GENERAL PREPARATION
1. Keep upright and avoid squeezing or vibration during
transport. Avoid a slant angle over 45 degree during
handling.
2. Avoid the door or top cap from being under
excessive stress when moving; otherwise, it may
become deformed.
2
TRANSPORT OF YOUR REFRIGERATOR
Screws
Decorative cover for bottom beam
1. Place your refrigerator in a well vented location
keeping it away from heat sources and/or direct
sunlight. Also, avoid humidity and damp locations to
protect the integrity of your appliance..
2. The refrigerator shall be placed on a flat and firm
ground (if not flat, you can use the leveling legs for
adjustment).
NOTE: Keep your refrigerator standing.
3. Make sure the power wire is not pinned by the
refrigerator or other objects so as to avoid accidents
arising from power wire faults. Please check the
voltage scope of your refrigerator against the actual
power supply before switching it on.
CAUTION
The refrigerator must be disconnected from the source
of electrical supply before attempting the installation
of accessory.
Don’t use mechanical equipment or other methods to
accelerate the defrosting process except the means
recommended by the manufacturer.
Don’t use any electrical appliances in the food storage
compartments except the model recommended by the
manufacture.
The R134a refrigerant and cyclopentane foaming
material used in the refrigerator are inflammable.
3
PLACING OF YOUR REFRIGERATOR
Loading ...
Loading ...
Loading ...