Loading ...
Loading ...
Loading ...
5) Secure cooktop from underneath with
the supplied clips and screws (see
Figure 12).
Installing the Pressure Regulator
WARNING: Never reuse old flexible connectors. The use of old flexible connectors can cause
gas leakage and personal injury. Always use new flexible connectors when installing a gas appliance.
To reduce the possibility of gas leakage, apply Teflon tape or a thread compound approved for use
with LP or Natural gases to all threaded connections.
• This cooktop is set for natural gas and is designed to operate at 5” water column pressure. The
gas supply is required to provide a minimum of 6” to a maximum of 14” water column pressure to the
cooktop regulator.
• If the cooktop is converted for liquid pretroleum (LP) gas, the LP gas supply is required to provide
a minimum of10” to a maximum of 14” water column to the cooktop regulator.
• The pressure regulator must be connected in series with the manifold of the cooktop and must
remain in series with the supply line regardless the type of gas being used.
Figure 12
Loading ...
Loading ...
Loading ...