Loading ...
Loading ...
02
General Safety Information
Inverter Safety
Installation and wiring must comply with the Local and
National Electric Codes (NEC) and must be done by a
certified technician.
Read all the instructions and cautions in the manual before
beginning the installation. There are no serviceable parts for
this inverter.
Do NOT disassemble or attempt to repair the monitoring screen.
Make sure all connections going into and from the inverter
are tight. There may be sparks when making connections,
therefore, make sure there are not flammable materials or
gases near installation.
The inverters are suitable for 12V Battery Banks ONLY.
ALWAYS make sure inverter is in OFF position and
disconnect all AC and DC connections when working on any
circuit associated with the inverter.
NEVER connect the AC output of the unit directly to an
Electrical Breaker Panel/ Load Centre which is also fed from
the utility power / generator.
When connecting battery terminals, ensure the polarity of the
battery connections is correct. Incorrect polarity may cause
permanent damage to the unit.
Be careful when touching bare terminals of capacitors as
they may retain high lethal voltages even after power is
removed.
Loading ...
Loading ...
Loading ...