SYN-DX-2.3 HP User Manual

Loading ...

Wet Sounds SYN-DX Series Owner’s Manual

INSTALLATION INSTRUCTIONS

Wet Sounds Marine Ampliers are designed for easy installation in your boat. To

ensure proper installation of your new purchase please follow all the suggestions

listed below. If you do not have experience with marine electrical and

mechanical systems contact a professional installer. Paying a qualied

installer is almost always cheaper than paying a dealership to repair your

boat.

LOCATING THE AMPLIFIER

The amplier must be securely mounted to a solid surface. Please select a

dry location to mount your amplier. All Wet Sounds products are designed to

operate in humid environments however direct contact with water can damage

the electronics. Do not mount the amplier to any area that may have excessive

vibration (like a subwoofer enclosure). Position the amplier in an area that

receives sufcient airow for proper heat dissipation.

SUPPLYING ENOUGH POWER

Your amplier does NOT make power; it converts power, or current, from your

boats electrical system and converts it into high power musical energy. If the amp

can’t get all the power it needs it will not produce its full output. Your Wet Sounds

amplier will produce full output longer than other amplies on the market today.

Should your voltage or current drop too low the amplier will drop below the rated

output. Make sure your boats charging system is in good working order. Any high

performance audio amplier will increase the demand on your alternator and

battery. If you are unsure have you charging system checked system testing by a

professional technician.

Loading ...

Wet Sounds SYN-DX-2.3 HP Series 2 Marine Amplifier