Loading ...
Loading ...
Loading ...
6
STEP 1 ASSEMBLE BASE FRAME
80
100
55
55
100
87
87
87
100
100
55
2
104
100
104
3
4
100
100
100
100
87
87
54
17
100
10
104
104
55
87
35
35
34
34
58
1
104
100
100
82
82
100
79
100
58
81
81
100
1. Attach FRONT UPRIGHT (3) to BASE
FRAME (1), using two 3/8" X 3" HEX
HEAD BOLTS (82), four 3/8" WASHERS
(100) and two 3/8" NYLA-NUTS (104).
2. Attach REAR UPRIGHT (4) to BASE FRAME
(1), using three 3/8" X 3/4" BUTTON HEAD
BOLTS (87) and three 3/8" WASHERS (100).
3. Insert the two 1-1/4" ROUND END PLUGS (58)
into the ends of the round Foot Plate Tube. Insert
one 2" X 3" END CAP (54) into the rear of the
BASE FRAME (1). Insert one 2" SQUARE END
CAP (55) into the side of the BASE FRAME (1).
4. Attach TOP FRAME (2) to REAR UPRIGHT (4),
using three 3/8" X 3/4" BUTTON HEAD BOLTS
(87) and three 3/8" WASHERS (100).
5. Attach the TOP FRAME (2) to the FRONT
UPRIGHT (3) using two 3/8" X 3-1/8" HEX HEAD
BOLTS (80), four 3/8" WASHERS (100), and two
3/8" NYLA-NUTS (104).
6. Insert three 2" SQUARE END CAPS (55) to
each end of the TOP FRAME (2).
7. Loosely attach UPRIGHT SUPPORT
FRAME (10) to the FRONT UPRIGHT
(3) using two 3/8" X 4-1/4" HEX
HEAD BOLTS (79), four 3/8"
WASHERS (100), and two 3/8"
NYLA-NUTS (104). Attach UPRIGHT
SUPPORT FRAME (10) to BASE
FRAME (1) and STABILIZING PLATE
(17) using two 3/8" X 3-1/4" HEX
HEAD BOLTS (81), four 3/8"
WASHERS (100) and two 3/8"
NYLA-NUTS.
To ease the assembly process, Do
not tighten bolts until instructed.
Skip Step 7 if you have purchased
the GLX/Cable Arm Option.
NOTE: (If you have purchased the Optional
Weight Stack Shrouds, you may need to
temporarily remove the upright support.
Loading ...
Loading ...
Loading ...