Loading ...
Loading ...
Loading ...
28
ENG
ENGLISH
ASSEMBLING AND PREPARING
4 Connect the Display Link Cable (for wall
mounting bracket; the longer one) to the
display link input on the back of the TV. Then,
mount the TV set on the wall in direction of the
arrow as shown in the figure.
5 Secure the set with the Wall Mounting
Bracket Pushpins.
6 Place the Stand Base in a proper location and
connect it with the Display Link Cable.
Wall Mounting
Bracket Pushpin
y Check the material of the wall and thickness
of finishing material.
y You can use the anchors and screws pro-
vided with the TV set for the wall made with
concrete, lightweight concrete, soft field-
stone, hard fieldstone, brick or cellular block.
y Do not mount on the wall made with plaster
board or medium density fibreboard (MDF).
In this case, the anchor and screws must be
inserted in the concrete inside of finishing
material. If there is no concrete inside, you
must install a separate hanger first and fix
the anchors and screws.
y For other cases, make sure that each fixed
part can resist the pull-out load of 70 kgf
(686 N) and shear load of 100 kgf.
NOTE
Tidying cables
Only 32/37/42/47/55LV37
**,
32/37/42/47/55LV55
**
,
32/42/47/55LW57
**
,
42/47/55/65LW65
**
,
47/55LW77
**,
47/55LW95
**
, 47/55LW98
**
1 Gather and bind the cables with the Cable
Holder on the TV back cover.
Only 47/55LZ96**
1 Secure the power cord with the Cable Holder
on the TV back cover. It will help prevent the
power cable from being removed by accident.
Cable Holder
2 After connecting the cables as necessary,
install Cable Holder as shown and bundle the
cables.
Cable Holder
Cable Holder
Loading ...
Loading ...
Loading ...