Loading ...
Loading ...
Loading ...
127
ENGENGLISH
MAKING CONNECTIONS
y
There may be interference relating to
resolution, vertical pattern, contrast or
brightness in PC mode. Change the PC
mode to another resolution or change the
refresh rate to another rate or adjust the
brightness and contrast on the menu until the
picture is clear. If the refresh rate of the PC
graphic card can not be changed, change the
PC graphic card or consult the manufacturer
of the PC graphic card.
y
The synchronization input waveform for
Horizontal and Vertical frequencies are
separate.
y
We recommend using 1920x1080, 60 Hz for
the PC mode, this should provide the best
picture quality.
y
Connect the signal cable from the monitor
output port of the PC to the RGB (PC) port
of the TV or the signal cable from the HDMI
output port of the PC to the HDMI IN (or
HDMI/DVI IN) port on the TV.
y
Connect the audio cable from the PC to the
Audio input on the TV. (Audio cables are not
included with the TV).
y
If using a sound card, adjust PC sound as
required.
y
If the graphic card on the PC does not output
analogue and digital RGB simultaneously,
connect only one of either RGB or HDMI IN
(or HDMI/DVI IN) to display the PC output on
the TV.
y
DOS mode may not work depending on the
video card if you use an HDMI to DVI cable.
y
If you use too long an RGB-PC cable, there
may be interference on the screen. We
recommend using under 5m of cable. This
provides the best picture quality.
NOTE
Loading ...
Loading ...
Loading ...