RHMS1 User Manual

Loading ...

BEFORE USING THE MILKSHAKE MAKER FOR THE FIRST TIME

• Ensure all packaging, swing tags and promotional labelling has been removed from the

milkshake maker.

• Positionyourmilkshakemakeronarm,level,heat-resistantsurface.

• Ensure the Switch on the top of the motor unit is set to position '0'.

• Plug the power cord into the wall power outlet

OPERATING THE MILKSHAKE MAKER

• Positionyourmilkshakemakeronarmandlevelsurface.

• Ensure the Switch on the top of the motor unit is set to position '0'.

• Plug the power cord into the wall power outlet and switch it on.

• Combineingredientsformilkshakeorfruitdrinkinthemilkshakecup.Donotllbeyondthe

maximumllline.

• Placethecupinyourmilkshakemakerensuringthetopofthecupisxedrmlybehindthe

cup retainer. The base of the cup should sit on the cup rest.

NOTE: This appliance incorporates a safety inhibitor switch that prevents the motor from running if

the cup is not correctly placed behind the cup retainer.

• To switch on the motor, set the switch to the desired speed (l-high or ll-low).

CAUTION: Avoid contacting moving parts. Keep hands, hair, clothing, as well as spatulas

and other utensils away from aerator during operation to reduce the risk of injury to

persons, and/or damage to the mixer.

• When the milkshake has reached your desired consistency set the switch to 0 to turn the

milkshake maker off.

• Do not operate the milkshake maker for more than 45 seconds continuously. Always allow a 2

minute break in between uses.

NOTE: Always switch the appliance to the off position ‘0’ and wait for the aerator to completely

stop before removing the cup.

• Remove the milkshake cup and serve.

NOTE: When removing the cup hold on to the stand.

CARE AND CLEANING

• Tocleantheaerator,llthecuptothemaximumlllinewithwarmsoapywater.Fitthecupto

the stand and set the switch to the desired speed (l-high or ll-low).

• Always switch the appliance to the off position ‘0’ and wait for the aerator to completely stop

before removing the cup.

• Switch the power off at the power outlet and then remove the plug before cleaning the motor

housing.

• Wipe the outer surfaces with a soft damp cloth. If necessary, use a little dish washing

detergent.

• Wash the milkshake cup in warm soapy water or alternatively place in the dishwasher.

• Do not use harsh or abrasive cleaning agents or solvents.

• Do not use alkaline cleaning agents when cleaning this appliance.

• Do not immerse the milkshake maker in water or any other liquid.

Loading ...

User Manual - Page 5