Loading ...
Loading ...
Loading ...
13
ASSEMBLY
STEP 13
When not in use, hang
regulator/hose (23) on body handle
(8) as shown.
8
23
PRESEASON INSTRUCTIONS
Curing your smoker will rid the unit of chemicals and oils left over by the manufacturing process
allowing them to burn off. Preseason smoker prior to fi rst use.
1. Perform soapy water test (see pg. 3).
2. Using a napkin or cloth, rub a light coat of cooking oil on cooking grates and inside smoker doors.
Make sure water pan is in place with NO WATER.
3. Fill flame disk bowl with 2 cups (0.56l) of wood chips and light smoker. Close door.
4. Let the smoker burn for about 30 minutes. Make sure temperature gets up to 400°F (204°C).
5. Allow unit to cool completely.
6. Reapply light coat of cooking oil on the grilling surface and inside of smoker door.
7. Relight smoker and burn the oil for 20 minutes.
• Cure your smoker periodically to prevent excessive rust.
SMOKER IS READY FOR USE
REPLACEMENT PARTS LIST
PART NO REPLACEMENT PART ITEM NO
1 Body Kit 9905100022
2 Large Door with Logo
Plate
9005100047
3 Air Damper Kit 9904090069
4 Rear Leg Kit 9905100002
5 Control Panel Kit 9905100004
6 Burner Box Kit 9905100005
7 Door Handle Kit 9905100025
8 Body Handle Kit 9905100003
9 Flame Disk Bowl 911060006
10 Water Bowl 9005100009
11 Water Bowl Holder 9005100007
12 Cooking Grate 911060003
13 Temperature Gauge Kit 9907090034
14 Valve Kit 990060291
15 Ignitor Assembly Kit 990060328
16 Control Knob 911060014
17 Burner 9005100011
18 Grease Clip 9005100025
19 Door Latch Kit 990050222
21 Cooking Grate Support 9005100006
22 Match Stick with Chain 908060003
23 Regulator/Hose 911060001
24 Grease Cup 9005100039
25 Right Front Leg Kit 9905100021
26 Left Front Leg Kit 9905100020
27 Small Smoker Door 9005100048
Hardware Kit 9903100022
Instruction Manual 9805100014
6
(A)
M6x12
Phillips Screw
Qty-24
(B)
#10x3/8
Self-tapping Screw
Qty-4
(C)
M6x20
Phillips Screw
Qty-4
(D)
Wing Nut
(packed with temperature gauge)
Qty-1
HARDWARE LIST
STOP!
DO NOT RETURN TO RETAILER For Assembly Assistance, Missing or Damaged Parts
Call: MASTERBUILT Customer Service at 1-800-489-1581.
Please have Model Number and Serial Number available when calling.
These numbers are located on silver label on back of unit.
Loading ...
Loading ...
Loading ...