User Manual - Page 263

For 2014 LEGACY 3.6R LIMITED.

Loading ...
Loading ...
Loading ...
Black plate (268,1)
Model "A2500BE-B" EDITED: 2013/ 12/ 20
5-48
Audio/Handsfree system
Hands-free mode, press the ON hook
switch
.
! Preparation for using the Hands-
free system
Before using the Hands-free system, it is
necessary to register a cell phone in the
system. Perform the following procedure
to register a cell phone.
NOTE
. Up to 5 cell phones can be regis-
tered (for type A audio).
. Up to 6 cell phones (including Blue-
tooth
®
audio devices) can be registered
(for type B audio).
. When the ignition switch is turned to
the Acc or ON position, the regis-
tered cell phone may be automatically
connected to the system.
! Registering by operating dial
TUNE dial:
Type A audio
Type B audio
Select the menus by operating the TUNE
dial.
Type A audio:
1. Press the OFF hook switch
.
2. Sel ect ENGLISH/FRANÇAIS by
operating the TUNE dial.
–“WELCOME! will then be dis-
played.
3. Press the TUNE dial or t he talk
switch
.
4. Select the RECORD NAME menu, or
press the talk switch
.
5. Say the name to be registered.
6. Select the CONFIRM menu.
After CAR M_MEDIA is displayed,
a pass key will be displayed.
7. Input the displayed pass key into the
cell phone while PKY: **** is displayed.
Type B audio:
1. Press the OFF hook switch
.
If no cell phone is registere d,
Welcome!! is shown on the screen.
In this case, perform the procedure
after step 4.
2. Select the Setup menu.
3. Select the Phone Setup menu.
4. Select the Pair Phone menu.
5. Select the Record Name menu.
6. Say the name to be registered.
7. Select the Conf irm p air p hone?
menu.
8. Select the Phone Only menu to
register only a cell phone, or select Int.
Audio menu to register internal audio in
addition to the cell phone.
9. After Car Multi-Media is displayed, a
pass key will be displayed.
10. Input the displayed pass key into the
cell phone while Passkey: **** is dis-
played.
! Registering by using voice com-
mand system (type B audio)
NOTE
If no cell phone is registered, when the
OFF hook switch
is pressed, Wel-
come!! is shown on the screen. In this
case, perform the procedure after step
4.
1. Select a mode other than BT Audio
mode.
2. Press the talk switch
and say
Setup.
3. Press the talk switch
and say
Phone Setup.
4. Press the talk switch
and say Pair
Phone.
5. Press the talk switch
and say the
name to be registered.
Loading ...
Loading ...
Loading ...