Loading ...
Loading ...
Loading ...
Cup traySaucer
Rotary
Blade
Rubber seal
Lid
Container
UNLOCK
Drip tray
Tea pouring lever
CARE AND CLEANING
E-18
Wash with warm or cold water using a soft sponge and then let dry.
For heavier spills and dirt, use a mild soap or detergent solution.
Wash with warm or cold water using a soft sponge and then
let dry. Remove the rotary blade in the container.
For heavier spills and dirt, use a mild soap or detergent solution.
For tea stains, use oxygen bleach.
Clean around the rubber seal with running water while holding
down the tea pouring lever. Any remaining dirt may cause
water leakage. Make sure to unlock the tea pouring lever
before cleaning.
NOTES:
1. If the rubber seal is removed, unlock the tea pouring lever, hold down the lever, and securely re-attach the rubber
seal to the bottom of the container. Then fill the container with water to check whether any water leakage occurs.
2. Do not remove the rubber seal and the lid cover by force.
Rotary Blade
Removal
Carefully pull out the rotary blade. (It may be firmly attached to the
container)
Projection
Installation
Carefully push the rotary blade onto the projection that is
at the bottom of the container.
NOTE:
To prevent misplacement or accidental swallowing, do not forget to reinstall the rotary blade after cleaning.
Saucer / Cup Tray / Drip Tray
Tea Container
After Use
After Use
ENGLISH
Loading ...
Loading ...
Loading ...