Loading ...
Loading ...
Loading ...
15
The end of cooking function (main oven only)
This function is similar to the semi-automatic function, however
instead of setting a countdown time, you select the time of day that
you want the oven to switch off at.
o Place the food that you want to cook inside of the oven and
close the door.
o Select an oven function and cooking temperature using the
relevant control knobs.
o Press and hold down the programme button (6) until the
decimal point starts to flash to enter programming mode, the
oven in use symbol (2) will appear on the LED display.
o Release the programme button and then press it again. The
automatic cooking symbol (1) will flash and “dur” will appear on
the LED display.
o Release the programme button and then press it for a third
time, “end” will appear briefly on the LED display before
showing “0.00”.
o Use the plus (7) and minus (5) buttons to set the time of day
that you want the oven to switch off at.
o The maximum countdown time that can be set is 10 hours.
o When the correct time of day appears on the LED display,
release the plus and minus buttons. Cooking will begin
immediately, after a few seconds the countdown time will start.
o The automatic cooking symbol (1) and the oven in use symbol
(2) will appear on the LED display.
o At the end of the cooking time, an audible signal will sound and
the automatic cooking symbol will flash on the LED display.
o To reset the oven and cancel the audible alarm, press the
programme button until the oven in use symbol appears on the
LED display and the automatic cooking symbol goes out.
o IMPORTANT: If you have not turned the oven function selector
knob and thermostat control knob to their OFF positions, when
you reset the oven it will continue to heat.
Loading ...
Loading ...
Loading ...