Bushnell 119874C User Manual

Loading ...

Photo", or with very short Interval settings, some images may appear darker

than others due to the quick response and rapid retriggering of the camera,

allowing less time for the ﬂash to fully recharge before ﬁring again.

d. Make sure "LED Control" in the setup menu is set to "High" to ensure

maximum output. Check that "NV Shutter" in the menu is set to "Auto" and not

"High", as higher shutter speeds can result in darker images.

e. The ARD (anti-reﬂective device) shield can be removed to maximize ﬂash

output. See page 28 for more details.

2. Daytime photos or videos appear too dark

Make sure that the camera is not aimed at the sun or other light sources during

the day, as this may cause the auto exposure to produce darker results.

3. Night photos or videos appear too bright

If the subject is close to the camera (less than10ft/3m), change the LED

Control parameter in the Setup Menu to "Medium" or "Low". Set trigger Interval

to 2S or above.

4. Daytime photos or videos appear too bright

Make sure that the light sensor will not be in the shade (from tree leaves/

branches) while the camera lens is aimed into a bright area during the day.

5. Photos with streaked subject

a. In some cases with low lighting conditions and fast moving subjects, the 4K

or HIGH resolution settings may not perform as well as the HD setting.

b. If you have multiple images where fast moving subjects produce streaks on

the photo, try the HD setting instead.

c. Set Interval to 2S or above to reduce motion blur.

d. Set "NV Shutter" to "High" to minimize motion blur.

6. Red, green or blue color cast

a. Under certain lighting conditions, the sensor can become confused resulting

in poor color images.

b. If this is seen on a consistent basis, then the sensor may need servicing.

Please contact Bushnell customer service.

7. Short video clips—not recording to the length expected

a. Check to make sure that the SD card is not full.

b. Make sure that the camera has good batteries in it. Near the end of the

Loading ...

Bushnell 119874C Cameras