Loading ...
Loading ...
Loading ...
Page 27 ECD700W 7KG Condenser Dryer
26 / EN
Dryer / User Manual
7 Troubleshooting
Drying operation takes too long.
• Fibre filter pores might be clogged. >>> Wash the filter with warm water.
• Filter drawer might be clogged. >>> Clean the sponge and filter cloth (if any) in the
filter drawer. (for the products with a heat pump)
• The condenser might be blocked. >>> Wash the condenser.(for the products with a
condenser )
• The ventilation grills in front of the machine may be closed. >>> Remove any objects
in front of the ventilation grills that blocks air.
• Ventilation may be inadequate because the area the machine is installed in is too
small. >>> Open the door or windows to prevent the room temperature from rising
very high.
• A lime layer may have accumulated on the humidity sensor. >>> Clean the humidity
sensor.
• Excessive amount of laundry might be loaded. >>> Do not load the Dryer excessively.
• Laundry might not have been wrung adequately. >>> Perform a higher speed
wringing on the washing machine.
Clothes come out damp after drying.
• A program not suitable for the laundry type may have been used.>>> Check the
maintenance labels on the clothes and select a program suitable for the clothes’ type
or use time programs as extra.
• Fibre filter pores might be clogged. >>> Wash the filter with warm water.
• The condenser might be blocked. >>> Wash the condenser. (for the products with a
condenser)
• Filter drawer might be clogged. >>> Clean the sponge and filter cloth (if any) in the
filter drawer.(For the products with a heat pump)
• Excessive amount of laundry might be loaded. >>> Do not load the Dryer excessively.
• Laundry might not have been wrung adequately. >>> Perform a higher speed
wringing on the washing machine.
Dryer does not turn on or program cannot be started. Dryer does not run after it is
configured.
• Power plug might be unplugged. >>> Make sure the power cord is plugged in.
• Loading door might be open. >>> Ensure that the loading door is properly closed.
• A program might not be set or Start/Pause button might not be pressed. >>> Check
that the program is set and it is not in Stand-by position.
• Child lock may be activated. >>> Turn off the child lock.
Program terminated prematurely for no reason.
• Loading door might not be closed completely. >>> Ensure that the loading door is
properly closed.
• There might be a power outage. >>> Press the Start/Pause button to start the
program.
• Water tank may be full. >>> Empty the water tank.
Loading ...
Loading ...
Loading ...