Loading ...
Loading ...
Loading ...
ECD700W 7KG Condenser Dryer Page 22
21 / EN
Dryer / User Manual
Operating the product
C
Adding laundry after the drying
operation starts may cause the
dried laundry inside the machine
to mix with wet laundry and
leave the laundry damp at the
end of operation.
C
Adding or removing laundry
during drying may be
repeated as many times as
you wish. But this operation
continuously interrupts the
drying operation, and thus
increases program duration and
energy consumption. So, it is
recommended to add laundry
before the program starts.
C
If a new program is selected by
turning the program selection
knob while the Dryer is in stand-
by, the running program
terminates.
Do not touch the inner surface
of the drum while adding or
removing clothes during a
continuing program. The drum
surface is hot.
5.10 Cancelling the program
If you want to cancel the program and
terminate the drying operation for any
reason after the Dryer starts running,
turn the On/Off/Cancel knob, the
program will be cancelled.
A
The inside of the Dryer
shall be extremely hot when
you cancel the program during
machine operation, so run the
refresh program to allow it to
cool down.
C
When the child lock is activated,
the child lock warning indicator
on the screen turns on.
C
Child lock deactivates when the
Dryer is turned off and on by
the On/Off/Cancel knob.
When the child lock is active:
When the Dryer runs, or in stand-by state,
the indicator symbols won’t change upon
changing the position of the program
selection knob.
C
When the dryer runs and the
child lock is active, it beeps twice
when the program selection knob
is turned. If the child lock is
deactivated without returning
the program selection knob to its
previous position, program will
terminate due to the change in
the program selection knob
position
5.9 Changing the program after
it is started
You can change the program you selected to
dry your laundry with a different program
after the Dryer starts running
• For instance, select Extra Dry program
by turning the On/Off/Program
selection knob to select Extra Dry
instead of Iron Dry.
• Press the Start/Pause button to start
the program.
Adding and removing clothes during
stand-by
If you want to add or remove clothes to/
from the Dryer after the drying program
starts:
• Press the Start/Pause button to put the
Dryer in Stand-by state. The drying
operation stops.
• Open the loading door while in Stand-by
state, and close the door after you
remove or add laundry.
• Press the Start/Pause button to start
the program.
Loading ...
Loading ...
Loading ...