Loading ...
Loading ...
Loading ...
3
OPERATING INSTRUCTIONS
• Iftheapparatusisequippedwiththefollowingcontrols(Fig.10):
Push-button A = On/off lights switch.
Push-button B = On/off cooker hood switch. The appliance switches on at speed
level 1, If the cooker hood is on depress the push-button for 2 sec. to switch off the
cooker hood. If the cooker hood is at speed level 1 it will not be necessary to depress
the push-button to switch the cooker hood off. Decreases the motor speed.
Display C = Indicates the motor speed level selected and activates the timer.
Push-button D = Switches on the cooker hood. Increases the motor speed. Touching
the key at 3rd speed, the intensive function runs for 10 minutes, then the appliance
go back to work at the original speed. During this function the display blinks.
Key E = The Timer times the functions on activation for 15 minutes, after which
they are switched off. The Timer is deactivated by re-pressing Key E. When the
Timer is activated the decimal point must ash on the display. The Timer cannot be
activated if the intensive speed is functioning.
- The “clean air” function is activated by pressing key E for 2 seconds when the
appliance is switched off. This switches the motor on for 10 minutes every hour at
the rst speed. During functioning a rotary movement of the peripheral segments
must be visualised on the display.
When this time has passed the motor switches off and the xed letter “C” must
be visualised on the display until the motor re-starts after 50 minutes for another
10 minutes and so on. Press any key apart from the light keys to return to normal
functioning. Press key E to deactivate the function.
• Activecarbon/greaseltersaturation:
- When display item C ashes, at a speed where it alternates with the letter F (e.g. 1
and F), the grease lters must be washed.
- When display item C ashes, at a speed where it alternates with the letter A (e.g. 1
and A), the carbon lters must be replaced.
After the clean lter has been positioned correctly, the electronic memory must
be reset by pressing button A for approximately 5 seconds, until the indication F
or A shown on the display C stops ashing.
MAINTENANCE
• We recommend that the range hood is switched on before any food is cooked. We
also recommend that the appliance is left running for 15 minutes after the food is
cooked, in order to thoroughly eliminate all contaminated air.
The effective performance of the range hood depends on constant maintenance;
the anti-grease lter and the active carbon lter both require special attention.
• Theanti-greaselter is used to trap any grease particles suspended in the
air, therefore is subject to saturation (the time it takes for the lter to become
saturated depends on the way in which the appliance is used).
- To prevent potential re hazards, the anti-grease lters should be washed a
minimum of every 2 months (it is possible to use the dishwasher for this task).
- To remove lters, refer to Fig.7.
Consumer Support Troubleshooting Tips
Operating
Instructions
Safety InstructionsCare and Cleaning
Loading ...
Loading ...
Loading ...