Loading ...
Loading ...
Loading ...
Electrical Wiring
ENGLISH
Installation Manual 49
Dip switch setting
1. Location of setting switch
2. Dip switch setting
1) Set the dip switch and turn on the power of the outside unit to check whether the set value is correctly
entered in the 7 segment.
2) This function is shown for only 2seconds after the power is connected.
n Check outside unit setting
• The number on the 7 segment is displayed in order after the power is connected.
• This number represents the setting condition.
If the applicable dip switch is not set correctly,
the product may not operate properly.
SW01B
SW02B
7 segment
SW01B
1234567
ON
SW02B
1234567
ON
Order Number Item
1 - Model code
2 - Total capacity(HP)
3 2 Heat pump model
4 25 Normal mode display (If the dip switch is set incorrectly, it is not displayed.)
5 136 Model Type (Water Mini)
n
Model Code
Model Code Unit(HP) Powersupply Ref.
120 4
121 5 1Ø, 208/230V R410A
122 6
For Mexico:
Model ARWN~~~GA2: Nominal voltage: 220 V~ 60 Hz
Loading ...
Loading ...
Loading ...