Loading ...
Loading ...
Loading ...
10
Run 3 wires; black, white and green ,according to the
National Electrical Code and local codes and
ordinances, in 1/2" conduit from service panel to
junction box.
Connect black wire from service panel to black or red in
junction box, white to white and green to green-yellow.
Close and secure junction box cover.
7. Fit the control shaft in the correct position by pushing it
upwards.
Connect the electricity.
8. Join the two upper sections of the duct covering the
perforated frame.
Fix each individual section in place using 2 screws (1 per
side) near the ceiling.
9. Fix the upper duct to the perforated frame using 10
screws (5 per side).
10. Apply 2 casings (supplied) to cover the fixing points
on the upper duct sections (CAUTION: THE
UPPER DUCT CASINGS ARE EASY TO
RECOGNISE BECAUSE THEY ARE WIDER,
DEEPER AND ARE FITTED BY PRESSING
THEM INTO PLACE).
11. First insert the lower section of the duct, on which the
threaded inserts can be found.
Fix it to the frame, tightening the first and fourth screws
on both sides (counting from the bottom).
Loading ...
Loading ...
Loading ...